Hughes & Kettner MSM-1 Bedienungsanleitung

Hughes & Kettner MSM-1 User Manual Note: These instructions were written specifically for the Hughes & Kettner ATTAX preamp, but they apply eq

6. Insert the included flat cable connector plug in the MSM l’s socket so that the color-coded wire faces the notch on the socket. 7. The amp’s circu

Ensure the connector fits snugly and the connector markings match the socket’s grooved portion. Check all connections carefully. Then: Replace and

The MIDI LEARN BUTTON on the ATTAX front panel is operable after the MSM-1 is installed, and is used to assign ATTAX channel/effects combinations to v

INSTRUCTIONS - THE SHORT FORM 1.4 OPERATING THE ATTAX VIA MIDI SELECTING MIDI CHANNELS AND THE OMNI MODE Use the five-way DIP switch to select the MI

CHANNEL: STORING PRESETS Once you have selected the desired MIDI CHANNEL or OMNI settings, you can start storing presets (channel/effects loop combin

Determine the desired preamp sound via the front panel control features or the STAGEBOARD. Press the MIDI LEARN BUTTON again, but this time hold it

TROUBLESHOOTING 1) THE MSM-1 IS INSTALLED, BUT YOU CAN'T SWITCH THE ATTAX VIA MIDI. The external device is set to the wrong MIDI channel ->

The channel selector switches on the front panel or Stageboard are still active -> Switch the appropriate front panel or Stageboard channel select

II. INSTALLATION IN 19" DEVICES (e.g. ATTAX Preamp or TUBEMAN PLUS) 1. Unplug the AC mains lead. 2. Remove the cover plate by loosening the four